[ace-users] Enabling ACE "internal" logs

[Templie Cédric]

Hi,

I re-checked everything, using the examples and tests.
And finally i succeed to have logs :)

Here is what I set exactly in main:

/ACE_LOG_MSG->priority_mask( LM_ERROR | LM_DEBUG, ACE_Log_Msg::PROCESS );
       
ACE_Log_Msg::enable_debug_messages( LM_DEBUG );
ACE_Log_Msg::enable_debug_messages( LM_ERROR );
       
ACE::debug( true );/

It seems that I never tried to set everything all together, this is the 
only explanation I see.

Thanks again for your answers.

Templie Cédric

Templie Cédric wrote:
> Hi,
>
> I have an answer for all of your points :)
>
> - I follow the code using the debugger, and I see that an error occurs.
> - I use priority_mask with LM_ERROR set inside, should I do something 
> else to enable LM_ERROR logging ?
> - Well this is my problem it seems that I cannot turn on logging.
> - I used ACE_Task to spawn threads.
>
> This is what I do in main:
>
> ACE_LOG_MSG->priority_mask( LM_ERROR | LM_DEBUG, ACE_Log_Msg::PROCESS );
>
> I even tried: 
>
> ACE_Log_Msg::enable_debug_messages( LM_ERROR );
> ACE::debug( true );
>
> I do not know why it does not work.
>
> Thanks again for your answer.
>
> Cédric Templie
>
> Steve Huston wrote:
>   
>> If you're not seeing the message from the logging code you showed,
>> then:
>>
>> - there wasn't an error
>> - you've disabled LM_ERROR logging
>> - logging is off all together
>> - you're running in a thread without ACE logging set up (did you spawn
>> a thread yourself, not using ACE, and have it call ACE methods?)
>>
>> -Steve
>>
>> --
>> Steve Huston, Riverace Corporation
>> Would you like ACE to run great on your platform?
>> See http://www.riverace.com/sponsor.htm
>>
>>
>>   
>>     
>>> -----Original Message-----
>>> From: ace-users-bounces at cse.wustl.edu 
>>> [mailto:ace-users-bounces at cse.wustl.edu] On Behalf Of Templie Cédric
>>> Sent: Thursday, July 19, 2007 5:41 AM
>>> To: Johnny Willemsen
>>> Cc: ace-users at cs.wustl.edu
>>> Subject: Re: [ace-users] Enabling ACE "internal" logs
>>>
>>>
>>> Hi,
>>>
>>> Thanks for your quick answer.
>>>
>>> Unfortunately, even when I set ACE::debug(), I do not see any
>>>     
>>>       
>> logs....
>>   
>>     
>>> Here is the example of logs I want to see.
>>> In ACE_Asynch_Connector<HANDLER>::connect(...) there is 
>>> following lines:
>>>
>>> ACE_ERROR_RETURN ((LM_ERROR,
>>>                                            ACE_LIB_TEXT ("%p\n"),
>>>                                            ACE_LIB_TEXT 
>>> ("ACE_Asynch_Connect::connect")),
>>>                                              -1);
>>>
>>> As I understand this is supposed to write a log before returning -1 
>>> value. The fact is that I do not succeed at all to see the log...
>>> Do you have an idea of my problem ?
>>>
>>> Thanks again
>>>
>>> Cédric Templie
>>>
>>> Johnny Willemsen wrote:
>>>     
>>>       
>>>> Hi,
>>>>
>>>> Thanks for using the PRF form. ACE doesn't has real much 
>>>>       
>>>>         
>>> internally logging.
>>>     
>>>       
>>>> The ACE service configurator framework does output some 
>>>>       
>>>>         
>>> messages when
>>>     
>>>       
>>>> ACE::debug() is enabled, but nothing else specific. TAO is 
>>>>       
>>>>         
>>> a different
>>>     
>>>       
>>>> story, there we have a lot of logging. You can enabled 
>>>>       
>>>>         
>>> tracing in ACE during
>>>     
>>>       
>>>> compilation but that will result in a lot of messages.
>>>>
>>>> Regards,
>>>>
>>>> Johnny Willemsen
>>>> Remedy IT
>>>> Postbus 101
>>>> 2650 AC  Berkel en Rodenrijs
>>>> The Netherlands
>>>> www.theaceorb.nl / www.remedy.nl  
>>>>
>>>> *** Integrated compile and test statistics see
>>>> http://scoreboard.theaceorb.nl ***
>>>> *** Commercial service and support for ACE/TAO/CIAO
>>>>       
>>>>         
>> ***
>>   
>>     
>>>> *** See http://www.theaceorb.nl/en/support.html
>>>>       
>>>>         
>> *** 
>>   
>>     
>>>>   
>>>>       
>>>>         
>>>>> Hello,
>>>>>
>>>>> I use a simplified version of PRF, because I do not report an 
>>>>> issue, I 
>>>>> just have a question.
>>>>>
>>>>> ACE VERSION: 5.5.9
>>>>>
>>>>> HOST MACHINE and OPERATING SYSTEM:
>>>>> 	If on Windows based OS's, which version of WINSOCK do 
>>>>> you use?: Windows XP SP 2
>>>>>
>>>>> TARGET MACHINE and OPERATING SYSTEM, if different from HOST:
>>>>> COMPILER NAME AND VERSION (AND PATCHLEVEL): Microsoft Visual 
>>>>> Studio.net (MSVC 7.1)
>>>>>
>>>>> THE $ACE_ROOT/ace/config.h FILE: config-win32.h
>>>>>
>>>>> SYNOPSIS:
>>>>>
>>>>>     I want to enable ACE internal logs, but I do not 
>>>>>         
>>>>>           
>>> succeed at all.
>>>     
>>>       
>>>>>     I tried a lot of things as explained in the APG book 
>>>>> chapter 3, but 
>>>>> still do not see ACE "internal" logs.
>>>>>     I succeed to see the log I wrote, but I never see ACE 
>>>>> "internal" logs.
>>>>>
>>>>>     I certainly missed something in the ACE configuration, 
>>>>>         
>>>>>           
>>> even maybe 
>>>     
>>>       
>>>>> during the build.
>>>>>
>>>>> Thanks in advance
>>>>>
>>>>> Cédric Templie
>>>>>
>>>>> _______________________________________________
>>>>> ace-users mailing list
>>>>> ace-users at mail.cse.wustl.edu
>>>>> http://mail.cse.wustl.edu/mailman/listinfo/ace-users
>>>>>
>>>>>     
>>>>>         
>>>>>           
>>>>   
>>>>       
>>>>         
>>> _______________________________________________
>>> ace-users mailing list
>>> ace-users at mail.cse.wustl.edu
>>> http://mail.cse.wustl.edu/mailman/listinfo/ace-users
>>>
>>>     
>>>       
>>   
>>     
>
> _______________________________________________
> ace-users mailing list
> ace-users at mail.cse.wustl.edu
> http://mail.cse.wustl.edu/mailman/listinfo/ace-users
>