[ace-users] Enabling ACE "internal" logs
Douglas C. Schmidt
schmidt at dre.vanderbilt.edu
Sun Jul 22 15:03:54 CDT 2007
Hi Asif,
> The same sequence of things happened to me in 5.5.7. The point is:
> debug messages and priority_mask settings are "not" according to what
> is explained in APG. I ran into the same problem and had succeeded
> after trying the same solution that Cédric tried.
I'll let Steve H. address the isue of APG consistency!
Thanks,
Doug
> --
> Best regards,
>
> Asif
>
>
> On 7/20/07, Douglas C. Schmidt <schmidt at dre.vanderbilt.edu> wrote:
> >
> > Hi Cedric,
> >
> > I'm glad things are working for you now!
> >
> > Thanks,
> >
> > Doug
> >
> > > I re-checked everything, using the examples and tests.
> > > And finally i succeed to have logs :)
> > >
> > > Here is what I set exactly in main:
> > >
> > > /ACE_LOG_MSG->priority_mask( LM_ERROR | LM_DEBUG, ACE_Log_Msg::PROCESS );
> > >
> > > ACE_Log_Msg::enable_debug_messages( LM_DEBUG );
> > > ACE_Log_Msg::enable_debug_messages( LM_ERROR );
> > >
> > > ACE::debug( true );/
> > >
> > > It seems that I never tried to set everything all together, this is the
> > > only explanation I see.
> > >
> > > Thanks again for your answers.
> > >
> > > Templie Cédric
> > >
> > > Templie Cédric wrote:
> > > > Hi,
> > > >
> > > > I have an answer for all of your points :)
> > > >
> > > > - I follow the code using the debugger, and I see that an error occurs.
> > > > - I use priority_mask with LM_ERROR set inside, should I do something
> > > > else to enable LM_ERROR logging ?
> > > > - Well this is my problem it seems that I cannot turn on logging.
> > > > - I used ACE_Task to spawn threads.
> > > >
> > > > This is what I do in main:
> > > >
> > > > ACE_LOG_MSG->priority_mask( LM_ERROR | LM_DEBUG, ACE_Log_Msg::PROCESS );
> > > >
> > > > I even tried:
> > > >
> > > > ACE_Log_Msg::enable_debug_messages( LM_ERROR );
> > > > ACE::debug( true );
> > > >
> > > > I do not know why it does not work.
> > > >
> > > > Thanks again for your answer.
> > > >
> > > > Cédric Templie
> > > >
> > > > Steve Huston wrote:
> > > >
> > > >> If you're not seeing the message from the logging code you showed,
> > > >> then:
> > > >>
> > > >> - there wasn't an error
> > > >> - you've disabled LM_ERROR logging
> > > >> - logging is off all together
> > > >> - you're running in a thread without ACE logging set up (did you spawn
> > > >> a thread yourself, not using ACE, and have it call ACE methods?)
> > > >>
> > > >> -Steve
> > > >>
> > > >> --
> > > >> Steve Huston, Riverace Corporation
> > > >> Would you like ACE to run great on your platform?
> > > >> See http://www.riverace.com/sponsor.htm
> > > >>
> > > >>
> > > >>
> > > >>
> > > >>> -----Original Message-----
> > > >>> From: ace-users-bounces at cse.wustl.edu
> > > >>> [mailto:ace-users-bounces at cse.wustl.edu] On Behalf Of Templie Cédric
> > > >>> Sent: Thursday, July 19, 2007 5:41 AM
> > > >>> To: Johnny Willemsen
> > > >>> Cc: ace-users at cs.wustl.edu
> > > >>> Subject: Re: [ace-users] Enabling ACE "internal" logs
> > > >>>
> > > >>>
> > > >>> Hi,
> > > >>>
> > > >>> Thanks for your quick answer.
> > > >>>
> > > >>> Unfortunately, even when I set ACE::debug(), I do not see any
> > > >>>
> > > >>>
> > > >> logs....
> > > >>
> > > >>
> > > >>> Here is the example of logs I want to see.
> > > >>> In ACE_Asynch_Connector<HANDLER>::connect(...) there is
> > > >>> following lines:
> > > >>>
> > > >>> ACE_ERROR_RETURN ((LM_ERROR,
> > > >>> ACE_LIB_TEXT ("%p\n"),
> > > >>> ACE_LIB_TEXT
> > > >>> ("ACE_Asynch_Connect::connect")),
> > > >>> -1);
> > > >>>
> > > >>> As I understand this is supposed to write a log before returning -1
> > > >>> value. The fact is that I do not succeed at all to see the log...
> > > >>> Do you have an idea of my problem ?
> > > >>>
> > > >>> Thanks again
> > > >>>
> > > >>> Cédric Templie
> > > >>>
> > > >>> Johnny Willemsen wrote:
> > > >>>
> > > >>>
> > > >>>> Hi,
> > > >>>>
> > > >>>> Thanks for using the PRF form. ACE doesn't has real much
> > > >>>>
> > > >>>>
> > > >>> internally logging.
> > > >>>
> > > >>>
> > > >>>> The ACE service configurator framework does output some
> > > >>>>
> > > >>>>
> > > >>> messages when
> > > >>>
> > > >>>
> > > >>>> ACE::debug() is enabled, but nothing else specific. TAO is
> > > >>>>
> > > >>>>
> > > >>> a different
> > > >>>
> > > >>>
> > > >>>> story, there we have a lot of logging. You can enabled
> > > >>>>
> > > >>>>
> > > >>> tracing in ACE during
> > > >>>
> > > >>>
> > > >>>> compilation but that will result in a lot of messages.
> > > >>>>
> > > >>>> Regards,
> > > >>>>
> > > >>>> Johnny Willemsen
> > > >>>> Remedy IT
> > > >>>> Postbus 101
> > > >>>> 2650 AC Berkel en Rodenrijs
> > > >>>> The Netherlands
> > > >>>> www.theaceorb.nl / www.remedy.nl
> > > >>>>
> > > >>>> *** Integrated compile and test statistics see
> > > >>>> http://scoreboard.theaceorb.nl ***
> > > >>>> *** Commercial service and support for ACE/TAO/CIAO
> > > >>>>
> > > >>>>
> > > >> ***
> > > >>
> > > >>
> > > >>>> *** See http://www.theaceorb.nl/en/support.html
> > > >>>>
> > > >>>>
> > > >> ***
> > > >>
> > > >>
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>>>> Hello,
> > > >>>>>
> > > >>>>> I use a simplified version of PRF, because I do not report an
> > > >>>>> issue, I
> > > >>>>> just have a question.
> > > >>>>>
> > > >>>>> ACE VERSION: 5.5.9
> > > >>>>>
> > > >>>>> HOST MACHINE and OPERATING SYSTEM:
> > > >>>>> If on Windows based OS's, which version of WINSOCK do
> > > >>>>> you use?: Windows XP SP 2
> > > >>>>>
> > > >>>>> TARGET MACHINE and OPERATING SYSTEM, if different from HOST:
> > > >>>>> COMPILER NAME AND VERSION (AND PATCHLEVEL): Microsoft Visual
> > > >>>>> Studio.net (MSVC 7.1)
> > > >>>>>
> > > >>>>> THE $ACE_ROOT/ace/config.h FILE: config-win32.h
> > > >>>>>
> > > >>>>> SYNOPSIS:
> > > >>>>>
> > > >>>>> I want to enable ACE internal logs, but I do not
> > > >>>>>
> > > >>>>>
> > > >>> succeed at all.
> > > >>>
> > > >>>
> > > >>>>> I tried a lot of things as explained in the APG book
> > > >>>>> chapter 3, but
> > > >>>>> still do not see ACE "internal" logs.
> > > >>>>> I succeed to see the log I wrote, but I never see ACE
> > > >>>>> "internal" logs.
> > > >>>>>
> > > >>>>> I certainly missed something in the ACE configuration,
> > > >>>>>
> > > >>>>>
> > > >>> even maybe
> > > >>>
> > > >>>
> > > >>>>> during the build.
> > > >>>>>
> > > >>>>> Thanks in advance
> > > >>>>>
> > > >>>>> Cédric Templie
> > > >>>>>
> > > >>>>> _______________________________________________
> > > >>>>> ace-users mailing list
> > > >>>>> ace-users at mail.cse.wustl.edu
> > > >>>>> http://mail.cse.wustl.edu/mailman/listinfo/ace-users
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>>
> > > >>>>
> > > >>>>
> > > >>>>
> > > >>> _______________________________________________
> > > >>> ace-users mailing list
> > > >>> ace-users at mail.cse.wustl.edu
> > > >>> http://mail.cse.wustl.edu/mailman/listinfo/ace-users
> > > >>>
> > > >>>
> > > >>>
> > > >>
> > > >>
> > > >
> > > > _______________________________________________
> > > > ace-users mailing list
> > > > ace-users at mail.cse.wustl.edu
> > > > http://mail.cse.wustl.edu/mailman/listinfo/ace-users
> > > >
> > >
> > > _______________________________________________
> > > ace-users mailing list
> > > ace-users at mail.cse.wustl.edu
> > > http://mail.cse.wustl.edu/mailman/listinfo/ace-users
> >
> > _______________________________________________
> > ace-users mailing list
> > ace-users at mail.cse.wustl.edu
> > http://mail.cse.wustl.edu/mailman/listinfo/ace-users
> >
More information about the Ace-users
mailing list