[Ace-users] [tao-users] Does tao support outgoing port of client setting

Jules Colding colding at 42tools.com
Mon Jan 7 03:58:20 CST 2008


On Mon, 2008-01-07 at 10:48 +0100, Werner Buchert wrote:
> Wow,

Thanks ;-)


> will lorica be opensource?

It already is (GPL'ed) :-)


> Is it possible to test it?

Yes, just go head. You can get it from anonymous svn here:

http://svn.42tools.net/repos/lorica/trunk/


HTH,
  jules


> Thanks and best regards,
> 
> Werner.
> > Hi,
> > 
> > On Mon, 2008-01-07 at 09:04 +0100, Johnny Willemsen wrote:
> >> This is currently not supported. In order to do this you would need to
> >> have some kind of TAO specific option to specify a port range to be
> >> used by the connector. At this moment TAO leaves the decision which
> >> port to take to the OS. If you need this option you can add this
> >> yourself or hire a commercial support company (like Remedy IT) to add
> >> this for you.
> > 
> > Or you could use an IIOP firewall. Take a look at Lorica. It will do
> > what you need and more:
> > 
> > http://trac.42tools.net/lorica
> > 
> > Lorica is, as far as I know, the only OSS IIOP firewall on the planet.
> > It is not yet officially released, but I hope to get a message out in
> > the not to distant future.
> > 
> > HTH,
> >   jules
> > 
> > 
> > 
> >>  
> >>
> >> Regards,
> >>
> >>  
> >>
> >> Johnny Willemsen
> >> Remedy IT
> >> Postbus 101
> >> 2650 AC  Berkel en Rodenrijs
> >> The Netherlands
> >> www.theaceorb.nl / www.remedy.nl 
> >>
> >> *** Integrated compile and test statistics see
> >> http://scoreboard.theaceorb.nl ***
> >> *** Commercial service and support for ACE/TAO/CIAO             ***
> >> *** See http://www.theaceorb.nl/en/support.html                 *** 
> >>
> >>  
> >>
> >>  
> >>
> >> From:tao-users-bounces at cse.wustl.edu
> >> [mailto:tao-users-bounces at cse.wustl.edu] On Behalf Of Shi, Lei SNLB
> >> PEK
> >> Sent: Monday, January 07, 2008 3:56 AM
> >> To: tao-users at cs.wustl.edu
> >> Subject: [tao-users] Does tao support outgoing port of client setting
> >>
> >>
> >>  
> >>
> >> Hello,
> >>
> >>
> >>  
> >>
> >>
> >> My question does not aim at any special tao version, it is general
> >> that is there any way in tao that can setting outgoing port of client?
> >>
> >>
> >> I just want to configure the scope of outgoing socket port of client
> >> something like from 1000 to 2000.
> >>
> >>
> >>  
> >>
> >>
> >> Could anyone provide me some information?
> >>
> >>
> >>  
> >>
> >>
> >> Thanks in advance,
> >>
> >>
> >> Shilei
> >>
> >>
> >> IMPORTANT NOTE: This e-mail and any attachment are confidential and
> >> may contain trade secrets and may also be legally privileged or
> >> otherwise protected from disclosure. If you have received it in error,
> >> you are herewith informed about its status. Please notify us
> >> immediately by reply e-mail and then delete this e-mail and any
> >> attachment from your system. You are prohibited from making use of or
> >> copying this e-mail or any attachment or disclosing the contents to
> >> any other person.
> >>
> >> < Disclaimer in Chinese below, characters may not be displayed
> >> correctly.>
> >>
> >> ????:???????????,???????????????????????????,????????????,?????????????????????????????????????,???????????????????????????        
> >>
> >>
> >> _______________________________________________
> >> tao-users mailing list
> >> tao-users at mail.cse.wustl.edu
> >> http://mail.cse.wustl.edu/mailman/listinfo/tao-users
> > 
> > _______________________________________________
> > tao-users mailing list
> > tao-users at mail.cse.wustl.edu
> > http://mail.cse.wustl.edu/mailman/listinfo/tao-users
> > 
> 
> 



More information about the Ace-users mailing list