[great-users] Master interpreter problems

[Stephen Wickham]

Hi Daniel,

Thanks for suggestion. Unfortunately the same result occurs with the
pre-built House2Order transformation. I will work through the analysis
suggested by Attila and post the results.

Thanks,

Steve
----- Original Message ----- 
From: "Daniel Balasubramanian" <daniel at isis.vanderbilt.edu>
To: "great-users" <great-users at list.isis.vanderbilt.edu>
Sent: Tuesday, August 16, 2005 2:18 PM
Subject: RE: [great-users] Master interpreter problems


> Hi Steve,
>
> The problem may be with your transformation instead of the GReAT
installation.
> Try this: open the pre-built House2Order transformation that comes with
GReAT (you can get to it by going to Start Menu > All Programs > GReAT >
Samples > House2Order).  Try running this transformation and see if works
correctly.  If so, then the problem is somewhere in the transformation.  If
this is the case, export the transformation you made to a .xme file (File >
Export XML from inside GME) and send me this .xme file, and I can tell you
where the problem is.
>
> Thanks,
> Daniel
>
>
> -----Original Message-----
> From: great-users-bounces at list.isis.vanderbilt.edu on behalf of Stephen
Wickham
> Sent: Tue 8/16/2005 2:49 PM
> To: great-users
> Cc:
> Subject: Re: [great-users] Master interpreter problems
> Hi Attila,
>
> Thanks for your quick response.
>
> This is a clean install (no previous GReAT/Udm versions ever installed).
>
> I was mistaken regarding the UDM version. It is 2.23 (I installed the
version that shipped with GReAT-r1_4_1_VC6.exe).
>
> I have Visual Studio SP 6 installed.
>
> I am still experiencing problems however, so any additional advice you are
able to provide would be most welcome.
>
> Thanks,
>
> Steve
>
>
> ----- Original Message ----- 
> From: Attila Vizhanyo <mailto:viza at isis.vanderbilt.edu>
> To: great-users <mailto:great-users at list.isis.vanderbilt.edu>
> Sent: Tuesday, August 16, 2005 11:33 AM
> Subject: RE: [great-users] Master interpreter problems
>
>
> Dear Steve:
>
> Please make sure you have Visual Studio Service Pack 6 installed on your
machine.
> Have you ever installed any other GReAT/ Udm versions before? If so,
please make sure to remove those packages
> BTW, GReAT r1.4.1 comes with Udm 2.23. ( The installer
GReAT-r1_4_1_VC6.exe 35,204,541 bytes avaliable on the Escher repository
site contains udm 2.23). Maybe you just missed the r2.23 entry in the
changelog.txt file.
>
> HTH,
> Attila
>
>
> -----Original Message-----
> From: great-users-bounces at list.isis.vanderbilt.edu
[mailto:great-users-bounces at list.isis.vanderbilt.edu] On Behalf Of Stephen
Wickham
> Sent: Tuesday, August 16, 2005 11:54
> To: great-users
> Subject: [great-users] Master interpreter problems
>
>
> Please forgive me if this quesion is answered elsewhere. I am new to GReAT
and am trying to work through the House2Order tutorial. When I try to run
the Master Interpreter I receive the following error message:
>
> "GME: Component Execution Failed"
>
> Have I messed something up with the installation?
>
> I am running on Windows 2000 with the following ISIS software:
>
> GReAT 1.4.1 (VC6)
> GME 4.11.10
> UDM 2.21
>
> Thanks in advance,
>
> Steve Wickham
>
>
>
>
>
>   _____
>
>
>
>
> _______________________________________________
> great-users mailing list
> great-users at list.isis.vanderbilt.edu
> http://list.isis.vanderbilt.edu/mailman/listinfo/great-users
>
>
>
>
> _______________________________________________
> great-users mailing list
> great-users at list.isis.vanderbilt.edu
> http://list.isis.vanderbilt.edu/mailman/listinfo/great-users