[great-users] GReAT tutorial question
Stephen Wickham
wickham at unbc.ca
Wed Sep 14 12:39:06 CDT 2005
Hi Jeff,
I encountered the same problem - it was addressed on the list about a month
ago - see below.
Steve
========================================
From: "Stephen Wickham" <wickham at unbc.ca>
To: "A list for GReAT users to share bugs, fixes and ideas"
<great-users at list.isis.vanderbilt.edu>
Subject: Re: [great-users] Master interpreter problems
Date: August 16, 2005 10:56 PM
Hi Attila,
Problem Solved.
The 'Generate GR' interpreter was failing because it could not resolve
libcint.dll.
The directory in question: C:\Program Files\ISIS\UDM\3rdparty\cint was not
on the path.
Adding this directory solved the problem.
Interestingly the UDM_3RDPARTY_PATH environment variable was properly
defined but not included in the path.
In any case I am now up and running.
Thanks for all your help,
Steve
----- Original Message -----
From: "Attila Vizhanyo" <viza at isis.vanderbilt.edu>
To: "A list for GReAT users to share bugs, fixes and ideas"
<great-users at list.isis.vanderbilt.edu>
Sent: Tuesday, August 16, 2005 1:58 PM
Subject: Re: [great-users] Master interpreter problems
> The GReAT Master interpreter invokes multiple interpreters to produce
> intermediate files necessary for executing the transformation.
> To figure out which interpreter invokation failed, please do the
following:
> 1. Set 'Config file path name' attribute of Configuration model to
> 'c:\program files\isis\great\samples\house2order\config.mga'
> 2. Clink on the 'i' button on the GME toolbar, and select UML2XML from
> the list, and press 'Interpret...' This invokes the UML2XML interpreter.
> If you get an error, stop here, otherwise proceed to step 3.
> 3. Clink on the 'i' button on the toolbar, and invoke 'Generate GR'
> interpreter. If you get an error, stop here, otherwise proceed to the
> next step.
> 4. Clink on the 'i' button on the toolbar, and invoke 'Generate GRC'
> interpreter. If you get an error, stop here, otherwise proceed to the
> next step.
> 5. Clink on the 'i' button on the toolbar, and invoke 'Generate Config'
> interpreter. If you get an error, stop here, otherwise proceed to the
> next step.
>
> I suspect that it is the UML2XML interpreter that causes the problem.
> Go to 'c:\program files\isis\udm\bin, and open UML2XML.dll with the
> Dependency Walker tool (which comes with VS6). Check, if all
> dependencies resolve correctly by navigating the dependency tree.
>
> We have not tested Great on Windows 2000, which is quite deprecated in
> 2005. You might want to upgrade to Windows XP.
> But please let me know the outcome of the experiment above.
>
> Thanks,
> Attila
>
>
> Stephen Wickham wrote:
>
> > Hi Attila,
> >
> > Thanks for your quick response.
> >
> > This is a clean install (no previous GReAT/Udm versions ever installed).
> >
> > I was mistaken regarding the UDM version. It is 2.23 (I installed the
> > version that shipped with GReAT-r1_4_1_VC6.exe).
> >
> > I have Visual Studio SP 6 installed.
> >
> > I am still experiencing problems however, so any additional advice you
> > are able to provide would be most welcome.
> >
> > Thanks,
> >
> > Steve
> >
> >
> > ----- Original Message -----
> > *From:* Attila Vizhanyo <mailto:viza at isis.vanderbilt.edu>
> > *To:* great-users <mailto:great-users at list.isis.vanderbilt.edu>
> > *Sent:* Tuesday, August 16, 2005 11:33 AM
> > *Subject:* RE: [great-users] Master interpreter problems
> >
> > Dear Steve:
> >
> > Please make sure you have Visual Studio Service Pack 6 installed
> > on your machine.
> > Have you ever installed any other GReAT/ Udm versions before? If
> > so, please make sure to remove those packages
> > BTW, GReAT r1.4.1 comes with Udm 2.23. ( The installer
> > GReAT-r1_4_1_VC6.exe 35,204,541 bytes avaliable on the Escher
> > repository site contains udm 2.23). Maybe you just missed the
> > r2.23 entry in the changelog.txt file.
> >
> > HTH,
> > Attila
> >
> >
> > -----Original Message-----
> > *From:* great-users-bounces at list.isis.vanderbilt.edu
> > [mailto:great-users-bounces at list.isis.vanderbilt.edu] *On
> > Behalf Of *Stephen Wickham
> > *Sent:* Tuesday, August 16, 2005 11:54
> > *To:* great-users
> > *Subject:* [great-users] Master interpreter problems
> >
> > Please forgive me if this quesion is answered elsewhere. I am
> > new to GReAT and am trying to work through the House2Order
> > tutorial. When I try to run the Master Interpreter I receive
> > the following error message:
> >
> > "GME: Component Execution Failed"
> >
> > Have I messed something up with the installation?
> >
> > I am running on Windows 2000 with the following ISIS software:
> >
> > GReAT 1.4.1 (VC6)
> > GME 4.11.10
> > UDM 2.21
> >
> > Thanks in advance,
> >
> > Steve Wickham
> >
> >
> >
>
------------------------------------------------------------------------
> > _______________________________________________
> > great-users mailing list
> > great-users at list.isis.vanderbilt.edu
> > http://list.isis.vanderbilt.edu/mailman/listinfo/great-users
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >great-users mailing list
> >great-users at list.isis.vanderbilt.edu
> >http://list.isis.vanderbilt.edu/mailman/listinfo/great-users
> >
> >
>
> _______________________________________________
> great-users mailing list
> great-users at list.isis.vanderbilt.edu
> http://list.isis.vanderbilt.edu/mailman/listinfo/great-users
----- Original Message -----
From: "jeff" <jesmith at ComposableLogic.com>
To: "A list for GReAT users to share bugs, fixes and ideas"
<great-users at list.isis.vanderbilt.edu>
Sent: Wednesday, September 14, 2005 11:31 AM
Subject: Re: [great-users] GReAT tutorial question
> I deleted GReAT for vs6. I installed GReAT for VS71. I can run the
> master interpreter (as before) with no problems. When I invoke the graph
> rewrite engine I get a "Component Execution Failed" message. I have no
> idea what to do with this. Maybe I can talk to someone on the phone to
> make this more interactive?
>
> Attila Vizhanyo wrote:
>
> > There are two GReAT installation packages: one for VS6 and one for
> > VS71 (.Net 2003).
> > First please make sure you have downloaded GReAT for VS71. (If not,
> > then first uninstall the VS6 version, then reinstall the VS71 version)
> > The GReAT VS71 package looks for vsvars32.bat not for vcvars32.bat.
> > This file can be found in "C:\Program Files\Microsoft Visual Studio
> > .NET 2003\Common7\Tools", if you installed VS under C:\Program Files.
> > This folder is automatically added to your PATH env variable by the
> > GReAT installer.
> > If that setting is missing, please add it manually.
> > We do not support VS8 since there is no official release yet. VS8 is
> > announced to be released in Nov 2005.
> > This means that GReAT might or might not work with VS8, we haven't
> > tested this yet.
> > Please let me know, if you have other problems or questions.
> >
> > Thanks,
> > Attila
> >
> > jeff wrote:
> >
> >> I made a little progress on my own and have a different startup
> >> tutorial question. The graph rewrite process is looking for <visual
> >> studio>/vc98/bin to find sw like vcvars32.bat. Naturally I have no
> >> vc98/bin directory as I have later versions of studio. I have visual
> >> studio 8/vc/bin. When can I change the area in GReAT so it looks in
> >> the right place for my visual studio?
> >>
> >> Feng Shi wrote:
> >>
> >>> Jeff,
> >>>
> >>> This error message means that it doesn't find the meta with the
> >>> filetype
> >>> id. Would you please send me the transformation model and I would like
> >>> to take a look at it.
> >>>
> >>> Thanks,
> >>> Feng
> >>>
> >>> -----Original Message-----
> >>> From: great-users-bounces at list.isis.vanderbilt.edu
> >>> [mailto:great-users-bounces at list.isis.vanderbilt.edu] On Behalf Of
jeff
> >>> Sent: Sunday, September 11, 2005 12:18 PM
> >>> To: great-users
> >>> Subject: [great-users] GReAT tutorial question
> >>>
> >>> I was going through the tutorial. Everything ran fine up until the
> >>> "GR engine part". When I invoke the GR engine (through any method)
> >>> I get the following exception:
> >>> "Exception:GReATParameters::Init()"
> >>>
> >>> I am not sure what to do with this as I have no idea what this
> >>> means. Is
> >>>
> >>> there a place to look this up?
> >>> _______________________________________________
> >>> great-users mailing list
> >>> great-users at list.isis.vanderbilt.edu
> >>> http://list.isis.vanderbilt.edu/mailman/listinfo/great-users
> >>> _______________________________________________
> >>> great-users mailing list
> >>> great-users at list.isis.vanderbilt.edu
> >>> http://list.isis.vanderbilt.edu/mailman/listinfo/great-users
> >>>
> >>>
> >>>
> >>>
> >>
> >> _______________________________________________
> >> great-users mailing list
> >> great-users at list.isis.vanderbilt.edu
> >> http://list.isis.vanderbilt.edu/mailman/listinfo/great-users
> >>
> > _______________________________________________
> > great-users mailing list
> > great-users at list.isis.vanderbilt.edu
> > http://list.isis.vanderbilt.edu/mailman/listinfo/great-users
> >
> >
>
> _______________________________________________
> great-users mailing list
> great-users at list.isis.vanderbilt.edu
> http://list.isis.vanderbilt.edu/mailman/listinfo/great-users
More information about the great-users
mailing list